BMW X5 2008 3.0D Electronic Parking Brake Fault

Hi all.

I’m try to fix my mates BMW X5. It’s a 2008 BMW X5 3.0D. The electronic parking brake failed so I have replaced it with a new one. Since replacing it the following codes have come up. The new handbrake is working as it should. But can’t seem to clear the following current codes. Especially in the EPB.

Can anybody help? My Launch won’t allow me to change the stored VIN in the new EPB module, but would that throw up the EPB faults?

Cheers.



A0B0 CAS: Input, Brake Lights, Implausible History CAS (Car Access System -
CAS/FEM/BDC)
4262 DDE: Glow Plug, Cylinder 6,
Activation Current ECM (Engine Control Module
- DME/DDE)
Message From Car Access System To Body Bus Faulty, Receiver EGS,
CF37
History TCM (Transmission Control
Module - EGS/DKG/SMG)
Transmitter Car Access System
A82E GWS: Interlock E Faulty History GWS (Gear Selector Switch)
A830 GWS: Gear Selector Switch Cannot
Be Reset History GWS (Gear Selector Switch)
D36A No Message (VTG, 0xBC), Receiver
DSC, Transmitter VTG Current ABS (Anti-Lock Braking
System - DSC)
6DDB DSC: EMF: Interface History ABS (Anti-Lock Braking
System - DSC)
6DDC DSC: EMF: Interface History ABS (Anti-Lock Braking
System - DSC)
6EC4 DSC: Steering-Angle Sensor, Adjustment History ABS (Anti-Lock Braking
System - DSC)
D36B No Message (VTG, 0x376),
Receiver DSC, Transmitter VTG Current ABS (Anti-Lock Braking
System - DSC)
6F4E No Message (EMF, 0x201),
Receiver DSC, Transmitter EMF History ABS (Anti-Lock Braking
System - DSC)
601D EMF: DSC Interface: Signal Invalid Current EPB (Electrical Parking Brake
- EMF)
601E EMF: DSC Interface: Signal Invalid Current EPB (Electrical Parking Brake
- EMF)
6041 EMF: DSC Interface: Signal Invalid History EPB (Electrical Parking Brake
- EMF)
D397 No Message (Terminal 30G),
Receiver EMF, Transmitter CAS History EPB (Electrical Parking Brake
- EMF)
A6CF JBE: AUC Sensor History
SGM-ZGM (Safety And Gateway Module (ZGM) -
JBE/JBE2/JBBF/KGM)
Message (Speed, 0x1A0) Incorrect
C920
Or Missing, Receiver JBE,
History
SGM-ZGM (Safety And Gateway Module (ZGM) -
Transmitter DSC
JBE/JBE2/JBBF/KGM)
A734 JBE: ECO Valve Inactive History
SGM-ZGM (Safety And Gateway Module (ZGM) -
JBE/JBE2/JBBF/KGM)
A36C TCU: Fault In Internal Telephone Module Current TCU (Telematic Control Unit -
TEL/ULF/ULF-SBX)
A558 No Message (Parking Brake),
Receiver KOMBI, Transmitter EMF History IC (Instrument Cluster -
INSTR)
9DF7 AHM: No Hardware Signal, Brake- Light Switch History AHM (Trailer Module)
A8B2 FRM: Direction Indicator, Rear
Left, Faulty History FRM (Footwell Module)
A8C0 FRM: Rear Fog Light/Adaptive Brake Light, Right, Faulty Current FRM (Footwell Module)
A8C4 FRM: Second Brake Light/Adaptive Brake Light, Right, Faulty Current FRM (Footwell Module)
A8BF FRM: Rear Fog Light/Adaptive Brake Light, Left, Faulty Current FRM (Footwell Module)
A8B8 FRM: Brake Light, Centre, Faulty Current FRM (Footwell Module)
9CC5 FRM: Mirror Heating, Driver's Side, Faulty Current FRM (Footwell Module)
9CBB FRM: Short-Circuit Fault Current FRM (Footwell Module)
No Message (Automatic Air Recirculation Control Sensor,
E729
0x2D0), Receiver Integrated
History AC (Air Conditioning - IHKA)
Automatic Heating / Air Conditioning System, Transmitter
JBE
S 0270 No Communication Possible With:
Transfer Box Control Unit
601D EMF: DSC Interface: Signal Invalid Current AC (Air Conditioning - IHKA)
601E EMF: DSC Interface: Signal Invalid Current AC (Air Conditioning - IHKA)
51B0 EGS: Signal From DSC Implausible: Brake-Light Switch Current TCM (Transmission Control
Module - EGS/DKG/SMG)
9DF7 AHM: No Hardware Signal, Brake- Light Switch Current AHM (Trailer Module)
601D EMF: DSC Interface: Signal Invalid Current CDCDSP (Audio CD-Changer
DSP)
601E EMF: DSC Interface: Signal Invalid Current CDCDSP (Audio CD-Changer